HeadRush FX FRFR108 MK2 2000w 8" Powered Cabinet for Multi-FX / Amp Modelers

HeadRush FX FRFR108 MK2 2000w 8" Powered Cabinet for Multi-FX / Amp Modelers

HeadRush FX FRFR108 MK2 2000w 8" Powered Cabinet for Multi-FX / Amp Modelers

Loading product options

HeadRush FRFR-108 MKII is a powerful 2000-watt full-range flat-response guitar cabinet with Bluetooth®, 8” speaker, HF compression driver, two combo XLR + 1/4” inputs and XLR output.

If you’re new to FRFR amplifiers FRFR stands for “full-range flat-response.” This special type of amplification is very important for amp modeling pedals and pedalboards, as your amplifier needs to sound pure and transparent, so it can deliver a true “amp in the room” sound without colouring it as a traditional guitar amp would. The FRFR-108 MKII is precision-designed to get the most out of your modeler and deliver all the intricacies of your amp and cab emulations, with enough volume to be ready for any stage, rehearsal or jam session.

FRFR-108 MKII outputs a massive 2000 watts, which means you have enough headroom for almost any performance or rehearsal. Featuring a specially voiced 8-inch woofer and high-frequency compression driver, the FRFR-108 delivers a precise, full response across the entire frequency range, without any artificial coloration—which is critical to getting the most out of your amp modeler. The FRFR-108 MKII’s performance is exceptional, with max 129dB SPL and 46-22kHz frequency range.

FRFR-108 MKII features two combo XLR + 1/4" combo inputs for connecting your amp modeling pedal or pedalboard, each with their own independent volume controls. You can also wirelessly connect a mobile device to the FRFR-108 MKII via Bluetooth, so you can stream music wirelessly at rehearsal or during set breaks. There is also an XLR output for chaining more than one speaker together or sending the signal from your FRFR out to a front of house mix.

Stages and rehearsal rooms can easily become dense and muddy sounding as lower frequencies from different instruments battle each other; FRFR-108 MKII has a HPF cut switch to quickly pull those troublesome frequencies out and make sure your tone sits perfect in the mix. Unwanted electrical noise can also be a common problem; FRFR-108 MKII’s ground lift switch can eliminate hums and buzzes resulting from ground loops.

FRFR-108 MKII is rugged yet lightweight and easy to transport (at 21 lbs / 9.53 kg) making one trip load-ins at the gig or rehearsal space easier than ever. While you can use FRFR-108 MKII in its intended wedge position, its versatile design means that it can also be used in an upright or pole-mounted position, making it easier to direct your sound wherever you need it, which is especially helpful at outdoor gigs or other places where PA backline is limited.

Features
  • Powerful, professional sound
  • Precision-tuned for amp modelers
  • Bluetooth® enabled
  • Two combo XLR + 1/4" inputs with independent volume controls
  • XLR direct output allow for chaining speakers or sending to a front-of-house mix
  • Quickly adapts to venues and rooms
  • Lightweight, flexible and sturdy
  • Output Power: 2000 W
  • Low-Frequency: 8.0” (203 mm) driver, 2.0” (50 mm) high-temperature voice coil
  • High-Frequency: 1.0” (25 mm) exit ceramic driver with 1.4” (35 mm) coil
  • Crossover Frequency: 2 kHz
  • Maximum SPL: 130 dB (peak) dB-SPL @ 1 m
  • Frequency Response: 62 Hz – 20 kHz (+/-3 dB)
  • Frequency Range: 52 Hz – 20 kHz (-10 dB)
  • Horn Coverage: 90° horizontal x 60° vertical (nominal)
  • (2) XLR+1/4” (6.35 mm) TRS combo inputs (Balanced)
  • (1) XLR output (Link)
  • (1) IEC power cable input
  • Line: 10 KΩ balanced, 20 KΩ unbalanced
  • Gain/Volume Control Range: -∞ to 0 dB, +4 dBu nominal, +10 dBu for max output
  • HPF Switch: 100 Hz
  • Dimensions: 256 mm x 245 mm x 436 mm
  • Weight: 9.5 kg