Neumann KH750 Closed Cabinet Subwoofer

Neumann KH750 Closed Cabinet Subwoofer

Neumann KH750 Closed Cabinet Subwoofer

Loading product options

The compact KH 750 DSP is the ideal choice for smaller rooms and smaller studio monitors, such as the KH 80 DSP. It has a unique and flexible 2.0/0.1 Bass Manager allowing the subwoofer to be used in many different system configurations. On the back panel there are analog and digital inputs and outputs, four routing modes and adaptable acoustical controls to allow for seamless system integration. The Neumann.Control software gives access to many additional functions inside the subwoofer. The KH 750 DSP can be used in music, broadcast, and post production studios for tracking, mixing, and mastering.

The newly designed 10” long-throw driver has a large magnet, linear motor design and a very stiff pressed steel basket. As subwoofers are usually placed on the floor, a robust grille protects the driver from accidental damage. The well-braced cabinet is a sealed designed which brings the fastest possible transient response. The two analog XLR inputs are balanced as are the two analog XLR outputs. The 192 kHz / 24-bit digital input can accept AES3 and S/P-DIF signals. There is a bypassable standby function and the switch-off time can be adjusted in Neumann.Control.

Via standard IP networking, Neumann.Control gives access to many additional the functions of the KH 750 DSP Subwoofer. Systems of loudspeakers can be defined, from mono to 3D, aligned for a good in-room sound, and then operated centrally: Setup, Align, Operate. At last, you do not have to be an expert to optimally integrate this subwoofer into your system, even in a small room.

Features
  • Easily installed compact cabinet with a very deep bass response
  • Compact ultra stiff wooden cabinet
  • In-house modelled long-throw bass driver with Extremely Linear Force Factor™ (ELFF™) and robust built-in grille
  • 2.0/ 0.1 Bass Management
  • Four routing modes
  • XLR electronically balanced analog inputs and outputs
  • DSP engine optimises output to achieve reference class sound
  • Wide range input gain and output level controls
  • 8-position phase control, continuous low cut control and parametric equalizer
  • Universal switched-mode power supply (100 … 240 V)
  • Ground lift
  • Low heat dissipation amplifiers with large headroom and sophisticated protection circuitry
  • Separate thermo limiter to protect the voice coil and power amplifier
  • Digital input and output
  • Network connector using standard IP protocol and your existing network infrastructure
  • Neumann.Control App for iPad® to setup, align and operate in a system