Earthquaker Devices Avalanche Run Stereo Delay & Reverb

Earthquaker Devices Avalanche Run Stereo Delay & Reverb

Earthquaker Devices Avalanche Run Stereo Delay & Reverb

The Avalanche Run is a dreamy stereosonic exploratory multi-tool that includes up to 2 seconds of delay time, reverse delay, tap tempo with subdivision control, switchable true bypass or buffered bypass with 5 different tail lengths (including a sound-on-sound style lo-fi looping mode) and an assignable expression control that maps the expression jack to a control of your choice, including the toggle! The delay section allows tweaking from tape emulation to bucket brigade styles with a twist of the wide-range Tone control. The cavernous, plate-style reverb has just a touch of modulation similar to the one found in EarthQuaker's Dispatch Master only more lush with an adjustable Decay. Otherworldly reverse delay and dynamic swelling reverb settings are accessible through a 3-way toggle switch. And that’s just the beginning...

Time: This controls the delay time and goes from 0ms to just under 2000ms.

Repeats: Controls the regeneration of the delay, from zero repeats to near infinite.

Tone: Controls the tone for the delay line only. Roll off highs to the left, roll off lows to the right and get a flat response in the middle.

Mix: The is the volume control for the delay line. This blends in the wet with dry until 1 o’clock, 1 o’clock to 3 o’clock boosts the wet signal over the dry and 3 o’clock up brings down dry until it is fully wet when all the way up.

Expression Jack Assign Switch: Use this switch to map the expression jack to one of the assigned controls.

Ratio Selector Switch: Selects delay subdivisions when time is set by the “Tap” switch.

Decay: Controls the decay length of the reverb, short decay counterclockwise, long cavernous decay clockwise.

Toggle Switch (Mode Selector): - "Both" is the standard delay and reverb mode, "Reverse" is reverse delay mode with standard reverb and "Swell" is the volume swell mode.

Mix: This is the volume control for the reverb. Blends in the wet with dry until 1 O’clock, 1 O’clock to 3 O’clock boosts the wet signal over the dry and 3 O’clock up brings down dry until it is fully wet when all the way up.

Features
  • Expansive Reverb and Delay unit
  • Up to 2 seconds of delay time
  • Includes Tap Tempo functionality and subdivision control
  • Multiple tail lengths
  • Lo-fi looping mode
  • Assignable expression control that incorporates exp. jack
  • Delay emulates tape to bucket brigade styles and reverse delay
  • Expressive plate reverb is capable of cavernous tones
  • Flexi-Switch™ allows you to simultaneously use momentary and latching style switching
  • EarthQuaker recommend use with a Moog expression pedal, they cannot guarantee compatibility with other expression pedals
  • Includes 9v centre-negative 1-amp DC power supply
  • All analog dry signal path
  • All digital wet signal path with 20Hz – 20kHz frequency response
  • Output Impedance: 100 Ohm
  • S/N Ratio: 115dB typical
  • 24-bit 96kHz A/D & D/A converters
  • Assembled, wired and tested in Akron, Ohio