Adam Sub 8 8.5" Active Subwoofer

Adam Sub 8 8.5" Active Subwoofer

Adam Sub 8 8.5" Active Subwoofer

Loading product options

ADAM Audio subwoofers are designed with one primary goal in mind: Achieving absolute accuracy and an authentic natural sound in the process of music reproduction. This means combining exceptional bass power with precision and clarity in every subwoofer. These elements are the perfect partners to complement the highly acclaimed clarity and transparency of ADAM monitors in the lower and lowest frequencies.

All ADAM subwoofers feature both balanced (XLR) and unbalanced (RCA) input/output connectors and comprehensive control options that allow for adapting to different room acoustics and requirements.

All ADAM subwoofers feature a level control (-60dB to +6dB), phase switch (180°) and a variable upper frequency control (50-150Hz). For the satellite outputs, an 85Hz high pass filter can be switched in to block frequencies below 85Hz so satellite speakers can meet the Dolby® recommendations for theatre sound and also to relieve the satellites from the lower frequencies. In addition, you can either switch on/off the subwoofer manually or use the option of automatically powering up the subwoofer whenever it receives a signal (‚signal-on/ continuous').

The Sub8 is a small yet powerful subwoofer designed to extend the low frequency capabilities of any nearfield monitoring system down to 30Hz.

It houses a robust 8.5" woofer with a 1.5" voice coil driven by a 160W ICE power amplifier. This amp combines low heat generation with high performance to handle maximum power levels, even during long mix sessions.

The front baffle features two motorised knobs that let you tailor input level and crossover frequency settings. These settings can also be controlled via the included wireless remote, allowing you to optimise your sound reproduction from your ideal listening position.

The Sub8 is designed for smaller rooms up to 20 square meters. It is an ideal match for the ADAM AX-Series and the S1X and S2X nearfield monitors.

Features

  • Panel: Front
  • Frequency response: 28 Hz - 150 Hz
  • THD > 60 Hz: ≤1 %
  • Peak SPL max at 1m: ≥110 dB
  • Crossover frequencies: 50 - 150 Hz
  • Input impedance: 10 KOhm
  • Weight: 26.5 lb (12 kg)
  • Height x Width x Depth: 16" (410 mm) x 10" (260 mm) x 15" (380 mm)
  • Warranty: 5 Years