Blackstar Amped 2 Dept. 10 100W Amp Pedal with Multi Effects

  1. Rental for Schools
  2. Effect Processors & Pedals

Blackstar Amped 2 Dept. 10 100W Amp Pedal with Multi Effects

Blackstar Amped 2 Dept. 10 100W Amp Pedal with Multi Effects

AMPED 2 is a 100 Watt pedal power amplifier with drive pedals in the front end, and an advanced effects processor capable of delivering the tone and feel of a traditional valve amp. You can use it to power a cabinet, go direct or connect to the front end of a traditional amp, ensuring you can take your sound with you anywhere. Power reduction down to 1W and USB-C connectivity means it’s equally at home in the studio or the stage.

  • 100W 3 channel pedal power amp
  • Performance ready amp with multi effects
  • Unique high-headroom design that automatically matches to the speaker impedance to deliver maximum power and optimum tone with any 8 or 16 Ohm cabinet set-up
  • Response control delivers three distinctly different and authentic power valve responses - EL34, 6L6 and EL84. Each setting delivers the response, dynamics, sag and break-up characteristics of the selected valve power amp
  • Choose from USA, UK and Classic Amp voicings to dial in your perfect tone
  • 3 drive voices – Boost, Drive and Fuzz
  • Effects include Modulation, Delay and Reverb
  • Pro connectivity and integration into your setup using low latency USB audio as an interface for recording, TRS stereo line out and XLR Mono D.I. for live use
  • Effects loop, 2 x 9V DC outputs and MIDI control for easy integration into your pedalboard or rig
  • On board Chromatic Tuner allowing for tuning on the fly during live performances
  • Power: 100W
  • Effects: Drive, Mod, Delay, Reverb
  • Channel Voices: USA, UK, Classic
  • EQ: Bass, Middle, Treble
  • Power Reduction: 100W, 20W, 1W
  • Response: 6L6, EL34, EL84
  • Drive: Yes
  • Modulation: Yes
  • Delay: Yes
  • Reverb: Yes
  • Modulation Freeze effect: Yes
  • Delay Freeze effect: Yes
  • Reverb Freeze effect: Yes
  • Cab Rig DSP: Yes
  • USB Audio: Yes
  • XLR Cab Rig Output: Yes
  • Effects Loop: Yes (series or parallel selectable in Architect)
  • MIDI Control: Yes
  • Speaker Outputs: 8 Ohm, 16 Ohm
  • 9V DC Output: 2 (maximum combined current 500mA)
  • Voltage: 100V to 240V ~ 50/60Hz
  • Dimensions (mm): W 288mm x D 149mm x H 80mm
  • Weight (Kg): 1.98