sE Electronics DM1 Dynamite

sE Electronics DM1 Dynamite

sE Electronics DM1 Dynamite

4 ⭐⭐⭐⭐ This sE Electronics DM1 Dynamite has been fully tested and serviced by our team of music experts and works like new. There are some signs of previous use, but what fun is a rental if you don’t use it? Any signs of previous use are minor and superficial and there are no notable marks or scratches. All the photos to the left are of the item you would receive so you can see for yourself (yes, we really have someone downstairs photographing every preloved product). Includes: user manuals and the original packaging.

The DM1 DYNAMITE: explosive level for all your passive mics.

Some mics need a LOT of gain - and not all preamps are up to the challenge. The DM1 DYNAMITE is an ultra-slim active inline preamp that fits seamlessly between your mic and mic pre, providing a massive +28dB of clean, transparent gain for all your dynamic and passive ribbon microphones - perfect for podcasting, recording, or live sound.

Whether you’re a podcaster, recording engineer, or running live sound, the DM1 is the perfect way to boost the signal from a passive mic, reduce the likelihood of interference, and provide significantly improved level to your preamp – all without adding noise or coloration. Its output impendence is also the lowest in its class, allowing it to drive long cable runs while reducing susceptibility to RF interference, buzz and hum.

Reliable operation even in demanding on-stage applications in difficult environments is ensured by the roadworthy and slim all-metal design, robust construction, and high-quality manufacturing standards.

  • For Passive Ribbon or Dynamic Microphone
  • Provides 28 dB of Gain
  • Class-A Design
  • Low Self-Noise
  • Requires Phantom Power

Input: Passive microphone (ribbon/dynamic)

Output: Preamp/mixer or audio interface providing 48 V phantom power

Limitations: Not suitable for phantom-powered microphones (condenser microphones, active ribbon microphones)

Frequency Range: 10 Hz to 120 kHz (-0.3 dB)

Gain: 28 dB (load 1 kOhm)

Maximum Output Level: 8.3 dBV /2.6 V (0.5% THD)

Output Noise Level: 9 μV (JIS-A)

Powering: 48 V according to IEC 61938

Impedance: 135 Ohms

Load Impedance: >1 kOhm

Current Consumption: 3.0 mA

Connector: 3-pin male/female XLR

Dimensions: 1.91 x 9.55 cm

Weight:  79.9 g