Radial Engineering Radial JS2 Passive 2-way Microphone Splitter

Radial Engineering Radial JS2 Passive 2-way Microphone Splitter

Radial Engineering Radial JS2 Passive 2-way Microphone Splitter

Loading product options

The JS2 is a professional mic splitter designed to split a single source to multiple destinations simultaneously without signal degradation or noise. A premium Jensen transformer inside provides galvanic isolation to eliminate buzz and hum from ground loops, while maintaining an extremely wide bandwidth with ultra-low distortion and phase shift. Ground lifts on the outputs help further reduce noise, while an input pad allows line-level sources to connected as well. Both the JS2 and the JS3 can be rack mounted for touring and installation purposes, with up to eight fitting in the Radial J-Rak.

 
  • Send one microphone signal to three destinations simultaneously
  • Jensen transformer-equipped for exceptional audio quality
  • Eliminates hum and buzz caused by ground loops
  • Single isolated output provides optimal noise rejection
  • Audio circuit type: Passive mic/line splitter, transformer based
  • Transformer: JT-MB-CPC, 1:1 ratio
  • Number of channels: Three-way splitter (one in/three out)
  • Frequency response: 20Hz ~ 20KHz (+0dB/ -2dB)
  • Dynamic range: 140dB
  • Total harmonic distortion: 0.0005% @ 1kHz
  • Phase Deviation: 0.7° @ 100Hz; 2.8° @ 20Hz
  • Input Impedance: Source dependent, 10kΩ with Pad on, unbalanced
  • Output Impedance: Source dependent, 10kΩ with Pad on, balanced
  • Maximum Input: +25dBu @ 1kHz